The Hoka Kaha 2 Frost GTX is a 400g insulated winter mountain climbing mid boot rated right down to -25F. Heat and waterproof, its an attention-grabbing various to each calf-height insulated 400g winter mountain climbing boots. However when evaluating insulated mountain climbing footwear, it is advisable take into account your total winter footwear system, together with insulation, traction, and flotation. Likelihood is you’ve invested a substantial sum in gaiters, microspikes, crampons, and snowshoes…or you’ll..so that you’re going to need footwear that may gracefully interoperate with these elements.
RELATED: 10 Finest Winter Mountaineering Boots
- The Kaha 2 Frost GTX has a Vibram megagrip sole, 400 grams of insulation, an aluminum reflective sock liner, and Gore-tex membrane.
- A pair of males’s 10.5 US, runs barely small and weighs 2 lbs 10 oz
- The boots are about an inch longer (13″) than 10.5M Oboz Bridger 10″ 400g boots in the identical measurement and an inch wider (4.5″).
- The rear soles are broadly flared like most Hoka’s.
- There’s a slender front-toe kick.
- The soles are flat, though there’s a good rocker. However there aren’t any attachment factors for gaiters, together with no entrance gaiter ring and no protruding ridge within the again to carry down a snowshoe strap.
Insulation
The Kaha 2 Frost GTX is insulated with 400g insulation, which places it into the identical class of insulation as Oboz Bridger 10″ and Eager Revel IV 400g insulated winter boots which is able to maintain your ft from turning into popsicles in subzero climate. Each of these boots, the main winter boots utilized by many winter hikers, are calf-high boots and never mids (mid-height). The upper added leg protection makes them hotter than insulated mids, which is one thing to think about.
The 400g designation implies that 400g/sq. meter insulation is used within the boots, not that they’ve 400 grams of insulation. In the event that they did, they’d be as heavy as cinderblocks. It is a widespread mistake made by the advertising people who write product descriptions. Hoka charges these right down to -25F, however that assumes you’re mountain climbing vigorously and never standing round ready for SAR to reach to evacuate your buddy who’s damaged a leg.
I simply discovered that these boots solely have 200g insulation in them as an alternative of 400g. Whoever wrote the product description for the Hoka web site assumed that 200g x 2 sneakers = 400g. I don’t assume I’ve ever encountered an organization so inept or misleading in how they market their insulated footwear. That is simply unsuitable…on so many ranges!
Traction
Lots has been written about Vibram megagrip and the way nice it’s for climbing purposes, however none of that’s going to matter in any respect when mountain climbing on snow or ice. The one factor which may matter is the lug depth when mountain climbing on packed snow, and that’s form of ho-hum on the Kaha 2 Frost. It’s what you’d count on on a 3-season path runner. Deeper lugs would offer extra traction.
Traction Aids
For those who want traction on a winter hike, you’re going to be carrying and utilizing a number of of the next traction aids which might be suitable with soft-soled footwear.
How nicely does the Kaha 2 Frost GTX play with the binding methods of those varied traction aids?
- Hillsound Path Crampons: The pair I usually use (with Oboz Bridger 10″ boots) barely match over the additional lengthy and vast sole of the Kaha 2 Frost GTX. However extra importantly, the entrance presses down uncomfortably on the Kaha’s toe Field. I’ve seen this earlier than on different winter boots that don’t have beefy toe kicks that may resist the compression exerted on them by an elastomer harness. It ends in toe blistering, discomfort, and chilly, for the reason that toe field is compressed, lowering blood circulation.
- Kahtoola K10 Crampon. Non-starter. The again of the binding doesn’t match over the rear flared heel of the Kahas. The boots are also too lengthy for the versatile leaf spring (heart bar).
- Hillsound Path Crampon Professional. Non-Starter. The again of the binding doesn’t match over the rear flared heel of the Kahas, and the entrance doesn’t match both. The boots are additionally too lengthy for the middle bar.
- Grivel G1 Crampon: Non-Starter. The boots are additionally too lengthy for the versatile leaf spring (heart bar). The again binding assumes a vertical, not a flared heal, and doesn’t work.
Internet. Internet. The Kaha 2 Frost GTX doesn’t work with these standard traction aids. That’s an issue since I put on them over 50% of the time when mountain climbing up and down mountains. Your mileage could fluctuate.
Flotation
The one snowshoes I’ve readily available are MSR Evo Ascents with conventional 3-strap ski bindings. These are likely to work with any form of boot, together with mammoth mountaineering boots they usually labored surprisingly nicely with the Kaha’s. I nonetheless need to check them with snowshoe binding from Tubbs, MSR, and Atlas,
Preliminary Impressions
I’m underwhelmed by the Hoka Kaha 2 Frost GTX winter boots. The dearth of compatibility with traction aids offers me pause. The rear flared sole, which is Hoka’s signature function, can also be its biggest legal responsibility. For those who can stand the toe compression brought on by an elastomer harness and you’ve got a suitable snowshoe binding, these may be appropriate for winter mountain climbing…however for those who’re going to pay $280 for a pair of insulated winter mountain climbing boots, I’d get a pair that works with any traction assist or snowshoe and provides these Hokas a move.
SectionHiker is reader-supported. We solely generate profits if you are going to buy a product by our affiliate hyperlinks. Assist us proceed to check and write unsponsored and unbiased gear evaluations, newbie FAQs, and free mountain climbing guides.
